Experimental investigation and multi-response optimisation of end milling in aluminium-5083 alloy using desirability analysis Online publication date: Fri, 11-Aug-2023
by Abhiman Debnath; Siddhartha Kar; Uttam Kumar Mandal; Vidyut Dey
International Journal of Manufacturing Research (IJMR), Vol. 18, No. 3, 2023
Abstract: The present study deals with end milling of aluminium alloy (Al 5083-H112) with carbide tools in dry condition. Process parameters, such as cutting speed, feed rate, depth of cut, and tool parameters such as nose shape and number of flutes are varied to investigate their effect on material removal rate (MRR), resultant cutting force (CF) and surface roughness (Ra). Analysis of variance is employed to find the significance of the individual process parameters on the responses. The concept of desirability function analysis is employed to optimise the process parameters for machining. The composite desirability value determines the optimum combination of parameters obtained from all the responses' simultaneous optimisation. A confirmation test is conducted based on the optimal parameter setting to exemplify the potency of the approach. The confirmation test results are convincingly close to the predicted ones as the errors are less than 5%, which signifies the robustness of the model. [Submitted 9 August 2021; Accepted 14 December 2021]
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Manufacturing Research (IJMR):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com