Geomechanical model of Ratawi shale reservoir Online publication date: Fri, 12-Jan-2024
by Raed H. Allawi
International Journal of Oil, Gas and Coal Technology (IJOGCT), Vol. 35, No. 1, 2024
Abstract: Borehole instability problems are considered the majority challenge for several wells in the Ratawi shale reservoir, which increase non-productive time (NPT) and increase well-drilling expenditures. This work aims to construct an integrated mechanical earth model (MEM) to predict the wellbore failure and design optimum mud weight to improve the drilling efficiency of future wells. Several failure criteria were applied in this work, including Modified Lade, Mogi-Coulomb, and Mohr-Coulomb, which were utilised to calculate the proper mud weight and practical drilling paths and orientations. Furthermore, those failure criteria were matched with breakout from the caliper and image log to choose the best one. The results indicated that inadequate mud weight was the leading cause of wellbore instability problems. Therefore, the suitable mud weight for safe drilling in the Ratawi shale formation should be 11.5-13.5 ppg. The results indicate that the inclined wells should not exceed 15° and will be more stable parallel to the maximum horizontal stress direction. [Received: February 16, 2023; Accepted: May 7, 2023]
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Oil, Gas and Coal Technology (IJOGCT):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com