Effect of tool wear progression on cutting forces and surface quality during cutting metal matrix composites
by S. Kannan, H.A. Kishawy
International Journal of Machining and Machinability of Materials (IJMMM), Vol. 3, No. 3/4, 2008

Abstract: Metal matrix composites (MMCs) have joined the group of difficult-to-cut materials because of the inherent abrasiveness of ceramic reinforcements. Flank wear is the dominant form of tool failure due to severe abrasion of the tool material by the reinforcements during cutting MMCs. The progression of tool wear is so rapid that sometimes the cutting tool lasts only for few seconds at high cutting speeds. The main objective of this paper is to investigate the changes in the magnitude of machining forces generated and the alterations in the quality of machined surface as a consequence of rapid tool wear progression during cutting aluminium MMCs. Dry cutting experiments were carried out on A356/SiC and 6061/Alumina aluminium MMCs. Different process parameters and cutting tool geometries were tested using coated and uncoated tungsten carbide inserts on MMCs reinforced with varying volume fractions and average particulate sizes. The experimental results showed a substantial increase in the cutting forces. The effect of wear progression on the obtained surface quality was also quantified. The results provide valuable information on the relationship between the generated machining forces, progression of tool wear and the resulted surface quality during machining MMCs.

Online publication date: Wed, 29-Oct-2008

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Machining and Machinability of Materials (IJMMM):
Login with your Inderscience username and password:

Username:        Password:          Forgotten your password?

Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com