Threshold stress and load transfer effects in creep of an Al-8.5Fe-1.3V-1.7Si alloy reinforced with silicon carbide particulates–an Al-8.5Fe-1.3V-1.7Si-15SiC_p composite
by J. Cadek, K. Kucharova, S.J. Zhu
International Journal of Materials and Product Technology (IJMPT), Vol. 18, No. 1/2/3, 2003

Abstract: The creep behaviour of an Al-8.5Fe-1.3V-1.7Si-15SiC_p composite (the subscript p stands for particulates) in two temperature intervals, namely 623 to 723 K and 773 to 823 K is investigated using the isothermal constant stress creep test technique. The measured minimum creep strain rates cover six to seven orders of magnitude. Occasionally, this creep behaviour is compared with that of an unreinforced (matrix) Al-8.5Fe-1.3V-1.7Si (8009Al type) alloy. For the temperature interval 623 to 723 K the true threshold creep behaviour is characteristic. The true threshold stress σ_TH decreases with increasing temperature more strongly than the shear modulus and is higher in the composite than in the matrix alloy. With the strong temperature dependence of the true threshold stress, extremely high values of the apparent activation energy and the apparent stress exponent are associated. However, the minimum creep strain rate is matrix lattice diffusion controlled and depends on the fifth power of the effective stress σ_e = σ - σ_TH (σ is the applied stress). The creep behaviour is interpreted in terms of athermal detachment of dislocations from fine incoherent Al₁₂(Fe,V)₃Si phase particles in the composite matrix. At temperatures ranging from 773 to 823 K the true threshold stress is absent. The apparent stress exponent increases with increasing applied stress, the apparent activation energy decreases with both increasing applied stress and temperature. The true activation energy of creep is higher than the activation enthalpy of the matrix lattice diffusion. The creep is interpreted in terms of thermally activated detachment of dislocations from fine Al₁₂(Fe,V)₃Si phase particles. The load transfer effect does not play any role in creep either at temperatures 623-723 K or at temperatures 773-823 K.

Online publication date: Sun, 21-Sep-2003

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Materials and Product Technology (IJMPT):
Login with your Inderscience username and password:

Username:        Password:          Forgotten your password?

Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com