Comparative study of TiO2 films prepared by EPD and sol-gel techniques and their use in DSSCs Online publication date: Wed, 14-Jan-2015
by N. Bsiri; N. Ghrairi; M. Ben Rabha; M. Bouaïcha
International Journal of Nanotechnology (IJNT), Vol. 11, No. 9/10/11, 2014
Abstract: In this work, we give a comparative study of titanium dioxide (TiO2) films fabricated using the electro-phoretic deposition technique (EPD) and the sol-gel one. The TiO2 films were elaborated on commercial ITO layers and were used as photo electrodes in dye sensitised solar cells (DSSCs). To fabricate these cells, we used N3 as the sensitising dye, the electrolyte is a KI/I2 solution and the counter electrode is a thin aluminium film. The surface of fabricated cells is 2.5 cm2. Both scanning electron microscopy (SEM) and XRD characterisations show that the EPD technique leads to the formation of a thick TiO2 layer, where grains have greater dimensions than the sol-gel one. The transmission spectra measured in the UV-Vis-NIR domain show better values in the case of sol-gel; however, the reflectivity of the film is greater when we use the EPD technique. Measured current-voltage characteristic under AM1.5 illumination of the fabricated DSS cells permits us to conclude that each one of the sol-gel and EPD techniques has not only advantages, but also some weaknesses.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Nanotechnology (IJNT):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com