Exergoeconomic optimisation of the geometry of continuous fins on an array of tubes of a refrigeration air cooled condenser Online publication date: Sun, 01-May-2005
by Rahim K. Jassim, Tahar Khir, Badr A. Habeebullah, Galal M. Zaki
International Journal of Exergy (IJEX), Vol. 2, No. 2, 2005
Abstract: An exergy method for optimising the geometrical parameters of continuous fins on an array of tubes in an air-cooled condenser is developed in this paper. The method is based on exergy, economic analysis and optimisation theory. The condenser is characterised by the single/two phase flow inside the coil and the two components of exergy destruction, İΔP and İΔT, for refrigerant and air sides are calculated for different geometrics. A change in geometry was obtained by varying the condenser tube diameter for a selected condenser capacity, and hence the condenser tube length and total heat transfer area are calculated for a fixed condenser face length. In this way the effect of changes in the geometry on the total number of exergy destruction units is investigated. Also, the optimum balance between the two components of destruction is determined thereby giving the optimum solution for the heat exchanger area. The total cost function is expressed on the basis of annual cost of capital investment and the cost of compensation for the irreversibilities. The results show that the effect of the total irreversibility is 3.885% of the condenser capacity.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Exergy (IJEX):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com