Title: Force-impedance control of a 2-DOF planar robot using model predictive control based on successive linearisation of neural network model

Authors: Daniel Chifisi; Ahmed Ali Abouelsoud; Karanja Kabini; Maina Martin Ruthandi

Addresses: Department of Mechanical and Mechatronic Engineering, Pan African University Institute for Basic Sciences, Technology and Innovation, Nairobi, Kenya ' Department of Electronics and Electrical Communications Engineering, Cairo University, Cairo, Egypt ' Department of Mechatronic Engineering, Jomo Kenyatta University of Agriculture And Technology, Nairobi, Kenya ' Department of Mechatronic Engineering, Jomo Kenyatta University of Agriculture And Technology, Nairobi, Kenya

Abstract: This paper presents a position-based force-impedance controller for a class of robot manipulators. A multilayer perceptron (MLP) neural network (NN) based on the structure of a nonlinear autoregressive model with exogenous input (NARX) is used to accurately model the dynamics of the robot manipulator. Using the developed neural network-based prediction model, a position-tracking adaptive linear model predictive controller (MPC) is synthesised. The neural network model is trimmed and linearised successively about the reference trajectory in order to improve the performance. Finally, a force-impedance control loop is added to the position-tracking MPC to regulate the dynamic interaction between the end effector of the manipulator and the environment. The feasibility and effectiveness of the developed control scheme is verified through extensive simulation using a two degree of freedom (2-DOF) planar robot manipulator in MATLAB.

Keywords: force-impedance control; model identification; model predictive control; neural networks; robot manipulator.

DOI: 10.1504/IJAAC.2024.138218

International Journal of Automation and Control, 2024 Vol.18 No.3, pp.302 - 330

Received: 01 Mar 2023
Accepted: 28 May 2023
Published online: 30 Apr 2024 *

Full-text access for editors Full-text access for subscribers Purchase this article Comment on this article