Title: Basic principles of low-pressure injection moulding and experience with the process

Authors: Rainer Sack, Klaus-Dieter Lietzmann

Addresses: Bergakademie Freiberg, Sektion Metallurgie und Giessereitechnik, Pulvermetallurgie, Bernhard von Cotta Strasse 4, 9200 Freiberg, Federal Republic of Germany. ' Bergakademie Freiberg, Sektion Metallurgie und Giessereitechnik, Pulvermetallurgie, Bernhard von Cotta Strasse 4, 9200 Freiberg, Federal Republic of Germany

Abstract: The process of low-pressure injection moulding being normally used to make ceramic parts was modified for the manufacture of metal samples. Using the binder systems typical of injection moulding (paraffin and wax), experimental studies were carried out with commercially available carbonyl-iron powder in the grain size range

Keywords: powder metallurgy; metal injection moulding; low-pressure injection moulding.

DOI: 10.1504/IJMPT.1993.036548

International Journal of Materials and Product Technology, 1993 Vol.8 No.2/3/4, pp.371 - 380

Published online: 04 Nov 2010 *

Full-text access for editors Full-text access for subscribers Purchase this article Comment on this article