Title: Analysis of process parameters in wire electric discharge machining of gear cutting process using entropy grey relational analysis approach

Authors: Kasinath Das Mohapatra; Rupalika Dash; Susanta Kumar Sahoo

Addresses: Department of Mechanical Engineering, National Institute of Technology, Rourkela, Odisha, India ' Department of Mechanical Engineering, National Institute of Technology, Rourkela, Odisha, India ' Department of Mechanical Engineering, National Institute of Technology, Rourkela, Odisha, India

Abstract: The present paper focuses on optimisation of response parameters in a gear cutting process by wire EDM using a hybrid entropy GRA approach. The objective of the present work is to analyse the process parameters and to study the effects and optimise the process in order to produce high quality gears. The experiment was conducted in wire EDM machine by full factorial design of experiments having 64 numbers of combinations. Titanium was taken as the work-piece material with brass as the tool electrode and distilled water as dielectric. The experiment was carried out by taking three process parameters at four different levels each. Four response parameters, i.e., MRR, kerf width, wire wear rate and tooth width error (TWE) were obtained from the experiment and the outputs were optimised by using the hybrid approach to get an optimum setting from these combinations. The optimum settings obtained endorses to produce high quality gears in near future. [Received 9 August 2016; Revised 29 March 2017; Accepted 29 March 2017]

Keywords: brass; entropy; factorial; gear; Kerf; wear; wire EDM; Titanium.

DOI: 10.1504/IJMR.2017.088392

International Journal of Manufacturing Research, 2017 Vol.12 No.4, pp.423 - 443

Received: 09 Aug 2016
Accepted: 28 Mar 2017
Published online: 05 Dec 2017 *

Full-text access for editors Full-text access for subscribers Purchase this article Comment on this article