Effect of different hydrogen-oxygen flow rates on the performance and emissions of SI engine Online publication date: Tue, 25-Apr-2017
by Mohamed Brayek; Mohamed Ali Jemni; Gueorgui Kantchev; Mohamed Salah Abid
International Journal of Oil, Gas and Coal Technology (IJOGCT), Vol. 15, No. 1, 2017
Abstract: In this study, a water electrolyser was designed and manufactured to produce hydrogen and oxygen mixture (H2/O2). The produced gas was consumed instantaneously in order to eliminate the need for a storage device. The objective of the study was to investigate the effect of adding this mixture at various flow rates (0 L/min, 2.5 L/min, 5 L/min and 7.5 L/min) on the performance [the brake specific fuel consumption (BSFC) and the exhaust gas temperature] and emissions (HC, CO, CO2 and NOx) of a single cylinder 98 cm3 spark ignition engine. Tests were conducted under different engine loads (0%, 20%, 50%, 80% and 100%). The results show that at all engine loads, with the increase of the H2/O2 flow rate, the exhaust gas temperature as well as BSFC decrease significantly. Also, HC, CO and CO2 were improved. But, NOx emissions decreased only at low loads. At high load conditions, a dramatic rise of NOx emissions was observed. [Received: January 4, 2016; Accepted: June 22, 2016]
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Oil, Gas and Coal Technology (IJOGCT):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com