Investigation of optimum secondary fan location and air quantity to control DPM recirculation in underground dead-end workings Online publication date: Mon, 29-Nov-2021
by Ramakrishna Morla; Shivakumar Karekal; Ajit Godbole; Mahesh Shriwas; Brian Chapula; Jan Jacobs
International Journal of Mining and Mineral Engineering (IJMME), Vol. 12, No. 3, 2021
Abstract: This paper presents a detailed study on optimising the location of auxiliary fans to control DPM-air recirculation in dead-end workings in which diesel-operated vehicles are used. Parametric studies using computational fluid dynamics (CFD) models validated against field measurements are presented. The study consists of varying the fan locations from the dead-end crosscut and varying the intake air quantities using a 30 m3/s capacity two-stage 75 kW auxiliary fan. The results showed that if the drive intake air flow rate matches the fan capacity (30 m3/s), recirculation will occur even when the fan is located 10 m away from the crosscut entry. Results also showed that if the intake drive air quantity was greater than or equal to 150% of fan capacity (≥45 m3/s), no recirculation was observed when the fan location was at least 5 m away from the dead-end crosscut access.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Mining and Mineral Engineering (IJMME):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com