Roughness receptivity in swept-wing boundary layers – experiments
by Andrew L. Carpenter, William S. Saric, Helen L. Reed
International Journal of Engineering Systems Modelling and Simulation (IJESMS), Vol. 2, No. 1/2, 2010

Abstract: The receptivity of boundary layer stability to micron-sized, spanwise-periodic discrete roughness elements (DREs) was studied. The DREs were applied to the leading edge of a 30-degree swept-wing. The test article was attached vertically to the port wing of a Cessna O-2A aircraft and operated at a chord Reynolds number of 6.5 to 7.5 million. Critically spaced DREs were applied at the leading edge to excite the crossflow instability and move transition forward. In this case, calibrated, multi-element hotfilm sensors were used to measure disturbance wall shear stress. The roughness height was varied from 0 to 50 microns both in the positive (bumps) and negative (dimples) sense. Thus, the disturbance amplitude variations were determined as a function of modulated DRE heights.

Online publication date: Sat, 27-Feb-2010

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Engineering Systems Modelling and Simulation (IJESMS):
Login with your Inderscience username and password:

Username:        Password:          Forgotten your password?

Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com