Performance of four polyelectrolytes as flocculation aids in the primary treatment of textile effluents Online publication date: Thu, 04-Mar-2010
by Ackmez Mudhoo, Arvinda Kumar Ragen, Ganesh Dookee
International Journal of Environment and Waste Management (IJEWM), Vol. 5, No. 3/4, 2010
Abstract: Samples of textile effluents were subjected to physico-chemical treatment using alum, Polyaluminium Chloride (PAC), and different anionic and cationic acrylamide copolymers. Except for alum, all chemicals were tested individually. Combinations of alum and PAC with different anionic and cationic polyelectrolytes were also tested. Results indicated the anionic polyelectrolyte to be the best polymer when used in combination with inorganic coagulants. 30-40 mg/L PAC and 0.75 mg/L of anionic polymer resulted in the best removals of Chemical Oxygen Demand (COD), Total Suspended Solids (TSS) and Turbidity of 32.0-38.2%, 80.0-85.0% and 25.3-47.0%, respectively. This study indicated that dye-loaded textile wastewater could be treated with blends of inorganic–organic coagulants to reduce the organic load. However, the colour of the wastewater could not be removed.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Environment and Waste Management (IJEWM):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com