Local minimum-time trajectory planning for five-axis machining with and without tool tip deviation Online publication date: Sat, 07-Mar-2015
by Xin Wu, Yaoyu Li, Song Liu, Ronald A. Perez
International Journal of Mechatronics and Manufacturing Systems (IJMMS), Vol. 4, No. 3/4, 2011
Abstract: This paper presents the algorithms to achieve local minimum-time trajectory planning for the motors of a five-axis milling machine with and without the tool tip deviation. The forward and inverse kinematics are first applied to obtain the kinematic relation between the planned path for the tool-workpiece system and the motion of the five motors. The path trajectory of the machine can be obtained by a CAM software a priori. With the constraints of the feed rate, velocity, acceleration and jerk of each motor, the trajectory planning algorithms are developed to obtain the local minimum-time trajectory for every interval in the tool path through the quintic polynomial with or without the tool tip deviation. The bisecting-plane (BP) algorithm is applied to obtain the minimum-time trajectory for each interval, and the potential field method is used to find the projection of tool tip deviation on the reference path. The proposed algorithms are verified through simulation study.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Mechatronics and Manufacturing Systems (IJMMS):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com