Fabrication of micro-ball styluses for scanning-type surface form metrology
by Yuki Shimizu; Bin Xu; Wei Gao
International Journal of Nanomanufacturing (IJNM), Vol. 8, No. 1/2, 2012

Abstract: Two types of micro-ball styluses were fabricated for scanning-type surface form metrology. The micro-ball stylus is composed of a precision glass micro-ball and a shaft made by stainless steel or glass tube. The diameter of the micro-ball was less than 50 µm. The tip angle of the glass-tube shaft was approximately 10 degrees and that of the stainless steel shaft was approximately 50 degrees. It was confirmed that the micro-ball stylus with the glass-tube shaft can tolerate a 90 mN external force applied from the direction with an angle of 45 degrees with respect to the shaft axis, which was much more tolerant than the micro-ball stylus with the stainless steel shaft. To reduce the influence of the stick-slip phenomena caused by friction between the ball and the scanned surface, a PZT actuator was added to the micro-ball stylus, which is called the micro-tapping probe, so that the ball can be oscillated with a high frequency. Experiments of scanning the micro-ball stylus, which was mounted on an air-bearing displacement sensor, over a flat surface were carried out to test some basic performances of the micro-ball stylus.

Online publication date: Thu, 21-Aug-2014

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Nanomanufacturing (IJNM):
Login with your Inderscience username and password:

Username:        Password:          Forgotten your password?

Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com