Crack growth simulation of bulk and ultrafine grained 7075 Al alloy by XFEM Online publication date: Wed, 17-Sep-2014
by Prosenjit Das; Indra Vir Singh; R. Jayaganthan
International Journal of Materials and Product Technology (IJMPT), Vol. 44, No. 3/4, 2012
Abstract: In the present work, the effect of cryorolling on tensile strength, impact toughness and fracture energy of 7075 Al alloy has been studied experimentally, and quasi-static crack growth simulation has been performed by extended finite element method (XFEM) for both UFG and bulk Al Alloys. The 7075 Al alloy is rolled for 40% and 70% thickness reduction at cryogenic temperature. The microstructural characterisation of the alloy was carried out by using field emission scanning electron microscopy (FESEM). The cryorolled Al alloy after 70% thickness reduction exhibits fully formed ultrafine grain structure (grain size 600 nanometres) throughout the cross section as observed from FESEM micrographs. The mechanical properties of both alloys are obtained by tensile and Charpy impact testing. In XFEM simulations, this impact energy is used as a crack growth criterion for elastic-plastic ductile fracture. In XFEM, a discontinuous function is used to model the region behind the crack tip, whereas a crack tip is modelled by near-tip asymptotic functions.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Materials and Product Technology (IJMPT):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com