Identification of high-emitting catalyst cars on the road by means of remote sensing Online publication date: Thu, 29-May-2014
by A. Sjodin, K. Andreasson, M. Wallin, M. Lenner, H. Wilhemsson
International Journal of Vehicle Design (IJVD), Vol. 18, No. 3/4, 1997
Abstract: Repeated remote sensing measurements were carried out at a site outside Stockholm, Sweden, in 1995, to investigate the ability of a remote sensor to identify catalyst cars on the road with excess emissions. Ten catalyst cars were selected from the measurements for a chassis dynamometer and service/repair study. The results show that average remote sensor CO readings based on repeat measurements can be used to fairly accurately predict CO and HC emissions, but not NOx emissions, from catalyst cars over a full driving cycle. Furthermore, it was demonstrated that low-cost service and repair of high-emitting catalyst cars may reduce CO and HC emissions by more than 90% and fuel consumption by up to 20%, whereas NOx emissions tended to increase. The study indicates that the fraction of catalyst cars with excess FTP emissions in Sweden in 1995 was about 10% as regards CO and about 3% as regards HC, and that the 'super-emitter' fraction was about 0.5%. Despite the small fractions, these categories may account for a significant share of catalyst cars' overall CO and HC emissions.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Vehicle Design (IJVD):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com