Effect of blending ratio on the formation of bromoform and bromate in blended water samples disinfected with chlorine or ozone Online publication date: Sat, 31-Jan-2015
by Bassam S. Tawabini
International Journal of Environmental Engineering (IJEE), Vol. 6, No. 4, 2014
Abstract: This study was carried out to assess the potential formation of bromoform and bromate in drinking water samples prepared by blending desalinated and brackish ground water when disinfected by chlorination or ozonation methods. The levels of bromoform and bromate were determined under various treatment conditions including blending ratios, disinfectant dosage, temperature, and reaction time. Results showed that bromoform increases as chlorine dosages increases from 1 to 5 ppm. The blending ratio of 1:10 (v/v, brackish water: desalinated water) showed the lowest bromoform formation due to the low bromide ion content. Bromoform formation also increases with increasing reaction time and temperature. Results of the ozonation experiments indicated that high levels of bromate were detected only in blended water samples that were dosed with high levels of ozone (i.e., 2-5 ppm) regardless of the water blending ratio. Similar to bromoform, bromate formation increases with increasing the temperature and reaction time.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Environmental Engineering (IJEE):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com