Earth re-entry capsule CFD simulations taking into account surface roughness and mass injection at the wall
by J.B. Vos; A. Bourgoing; J. Soler; B. Rey
International Journal of Aerodynamics (IJAD), Vol. 5, No. 1, 2015

Abstract: Future space exploration missions will likely use capsule type ballistic re-entry vehicles that will re-enter the earth atmosphere at very high speed (velocities in the order of 11.7 km/s or higher, this compared to 7.5 km/s for the US Space Shuttle). Passive concepts will be employed for the deceleration, and the thermal protection system (TPS) needs to be dimensioned to protect the vehicle and samples from the effects of the aerodynamic heating. The technology readiness level of these passive concepts is today still rather low, leading to large design margins. This paper is concerned with the design of a possible earth re-entry capsule, it discusses the re-entry trajectory and heat loads encountered during descent. Detailed CFD simulations were made for three selected points on the re-entry trajectory. The ablation of the TPS material was taken into account through a mass injection boundary condition. The turbulence models employed in the study were modified to account for surface roughness due to ablation. Calculated heat fluxes and shear stresses for a smooth wall are compared with results from empirical correlations and showed a fairly good agreement. For rough walls, the CFD results show a substantial increase in convective heat flux, while the injection of mass at the wall reduces the convective heat flux.

Online publication date: Tue, 09-Feb-2016

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Aerodynamics (IJAD):
Login with your Inderscience username and password:

Username:        Password:          Forgotten your password?

Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com