Tribological characteristics and wear mechanism of cemented carbide tool in dry machining Ti-6Al-4V Online publication date: Fri, 03-Mar-2017
by Yi Hang Fan; Zhao Peng Hao; Jie Qiong Lin
International Journal of Materials and Product Technology (IJMPT), Vol. 54, No. 4, 2017
Abstract: In dry machining titanium alloys, tool wear is serious and machining efficiency is very low due to its low thermal conductivity and high chemical activity. The uncoated cemented carbide tool was used for the experiments of turning titanium alloy Ti-6Al-4V. Based on analysing the tribological characteristic of tool-chip and tool-workpiece interface using FEM, a scanning electron microscopy (SEM) equipped with energy dispersive X-ray spectrometer (EDS) and X-ray photoelectron spectroscopy were used to analyse tool wear mechanism. The results showed that there existed great differences of the friction between tool-chip/workpiece interface and general friction. There existed serious adhesion, diffusion and oxidation at the tool-workpiece interface. There was an optimal cutting condition under which the equilibrium of oxidation wear and adhesion wear can be achieved, which made tool wear reduce.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Materials and Product Technology (IJMPT):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com